Ford150> Year: 1965> Mileage: 100,000 km> Capacity: cm³> Fuel type: gasoline> Gearbox: manual> Power: 4778 HP>> Price: PLN 630,000>> Equipment:>>> 460> engine Pre-1972 heads with 76cc combustion chambers, exhaust ports are fully machined to remove thermal irregularities, flow is approximately 192 cfm and intake ports are approximately 296 cfm, both at 600 lift and 28" coolant. Bench tested.>> Stainless steel valves, size standard>> Rocket rollers, most likely Ford Motorsport.>> Camshaft installed by Edelbrock m6250-A443, 234/244 @ 0.050 0.562/0.588 lift, only with 112LSA instead of 110.>> Forged pistons, flat, I don't remember the brand, most likely TRW, it was practically standard back then.>> SCJ/Truck connecting rods, so with ball heads, a set of ARP bolts installed.>> Of course, all the necessary machining work was done correctly; connecting rod grinding, reaming/honing with backing plates and balancing.>> Decks have been planed to zero giving a compression ratio of 11.6 to 1 with Felpro 0.041 gaskets.>