De Tomaso Pantera Group 3 Year of production: 1974 The car underwent a complete, uncompromising "frame-off restoration" reconstruction, carried out in accordance with the FIA Group 3 homologation specifications. After completion of the work, only a few test kilometers were driven. It is possible to obtain FIA HTP. During the reconstruction, all components were regenerated or replaced with new ones. The scope of work included: • complete engine rebuild in Group 3 specifications • regeneration and alignment of the engine block • new crankshaft • new pistons and connecting rods • new heads • new intake manifold • complete new exhaust system • new carburetor • new alternator and starter • new oil pan • new oil pumps and water• new ignition deviceThe gearbox has been fully refurbished. A new high-performance clutch and new, reinforced axle shafts were installed. The steering system was completely rebuilt - new steering gear. Complete new Koni suspension. The entire braking system was made from scratch in accordance with the Group 3 specifications - new calipers, discs, cables and all other system components. The car also received:• a completely new cooling system• a completely new electrical installation with sensors and a datalogger• new rims and tires• new Sparco seats• Ireco safety cage with FIA homologation• new Sparco fire extinguishing system• and many other new or regenerated elements! The car has an 11-character vin number, the letters k were added at the end to publish the ad!