Good morning, I have a Mercedes 123 for sale, which left the production line in 1978 The presented model is the first series of the model with a four-cylinder R4 gasoline engine with a Stromberg carburetor, produced in the years 76-80 with a capacity of 2307 ccm and a 4-speed manual gearbox. The body was painted in the original shade of ClassicWeiss white in accordance with the chassis number. Bodywork done about 4 years ago, rear fender, rear belt and front floor replaced. The chassis got a new maintenance and the thresholds were painted with a urethane coating. The inside was soundproofed with bitumen plates and acoustic foam. The upholstery is in original condition, the sides/armchairs/sofa/dashboard have not been repaired - original, complete decors. * NEW HEADLINING The copy has an el. front windows, power steering. An Italian wooden steering wheel by Raid was founded. The engine is in very good condition, runs smoothly and the gearbox changes gears smoothly - new selectors and gaskets have been installed * Replaced water pump * Belt * Ignition device * New air filter * Fuel pump All 3 engine mounts and oil pan gasket replaced. The unit is flooded with fresh oil with a new oil filter, new coolant and brake fluid. The brake system was dismantled and assembled on new parts: * New brake pump * Replaced pistons in front and rear calipers * New seals * New discs and pads and their mounts * System vented and operational The suspension included: * New front shock absorbers * New rear shock absorbers * New connectors and tips * New bushings and rubbers * New pins * New steering damper * New stuffed cushions in the beam, etc., etc. I have invoices/receipts for the purchase of parts for inspection. The suspension is lowered - springs -40 New rubber supports were also mounted on the shaft. From the outside, new rear water scrapers and new door seals. Bumpers in nice condition. There are a few cosmetic things to improve. Yellow plate registration.