4 photos
1951' Cadillac Deville
Report This Ad!Rate This!Bookmark This
60,000złPublished 24 November 2023ID: ym29vJ
Expired
1 year ago
1 year ago
Information from the owner
Body: Coupe
Age: 72 years
Mileage: 100000 km
Displacement: 5000 cc
Transmission: Automatic
Exterior color: Black
Exterior: Nerf Bars
Seller's comments about 1951' Cadillac Deville
Cadillac coupe de ville 1951
I have had the car for 11 years,
Purchased in the USA as a complete, running car.
The roof is lowered by 12 cm. Everything was sandblasted, new sills, floor and fender repairs were installed.
It was disassembled at my home, so all the parts are there.
The car is complete, I will assemble it by the end of the year so that the new buyer can be sure that no strips are missing.
It has been registered in Poland with yellow plates and a lifetime technical inspection for 9 years.
The car is equipped with a Ridetech Shockwave suspension complete with compressor, cylinder, lines and valves, rear suspension converted to 4-link, everything manufactured by Ridetech.
The suspension is assembled, works, can be lowered and raised. Once lifted, it climbs onto the trailer without any boards. The suspension itself costs PLN 30,000. This is the best suspension you can buy for a custom classic.
Additionally, a complete rebuild kit was installed on the wishbones and linkages, all new.
I have new seals for doors, hatches, etc., and a complete weatherstrip kit.
New rear lamps
New wiring harness complete with fuse box.
I also kept the old harness.
I have had the car for 11 years,
Purchased in the USA as a complete, running car.
The roof is lowered by 12 cm. Everything was sandblasted, new sills, floor and fender repairs were installed.
It was disassembled at my home, so all the parts are there.
The car is complete, I will assemble it by the end of the year so that the new buyer can be sure that no strips are missing.
It has been registered in Poland with yellow plates and a lifetime technical inspection for 9 years.
The car is equipped with a Ridetech Shockwave suspension complete with compressor, cylinder, lines and valves, rear suspension converted to 4-link, everything manufactured by Ridetech.
The suspension is assembled, works, can be lowered and raised. Once lifted, it climbs onto the trailer without any boards. The suspension itself costs PLN 30,000. This is the best suspension you can buy for a custom classic.
Additionally, a complete rebuild kit was installed on the wishbones and linkages, all new.
I have new seals for doors, hatches, etc., and a complete weatherstrip kit.
New rear lamps
New wiring harness complete with fuse box.
I also kept the old harness.
