6 photos
1967' Austin Mini
Report This Ad!Rate This!Bookmark This
£49,950Published 9 August 2024ID: g7P3KL
Expired
3 months, 1 week ago
3 months, 1 week ago
Information from the owner
Age: 57 years
Fuel: Petrol
Transmission: Manual
Exterior color: Green
Seller's comments about 1967' Austin Mini
First delivered in May of 1967 as a Austin Mini 848cc.
Later in the cars life it was fully race prepared for historic series and currently has HTP papers valid until the 31st of December 2027.
Current engine is a Paul Inch 1293cc which has been dyno’d with 142bhp at the fly wheel and with 111bhp at the road wheels. At the same time that this was carried out the car was weighed coming in at 621. 5kg.
In 2023 SMG engineering carried out the below works:
KAD Steel Shim Race Head Gasket
New Valves
New top Hats
Remove Doors, Repair Hinges & Refit Correctly
Repair Wiring & Tidy Up Under Bonnet
Replace Bent Bonnet Hinges
Replace All Fuel Line – Tank/ Pump/ Carbs
Move Fire Extinguisher & Re-Pipe
Replace Pulls & Re-Route.
Replace Suspension Cones
Brake Fluid Change
Replace Breather Hoses & Coolant Hoses for Heater Box
In the way of race history, we have the following entry’s/ results on file:
July 2017 – Silverstone Classic – P11
September 2017 – Spa Six Hours – P8
April 2019 – 77th Goodwood Members Meeting Betty Richmond Trophy – P15
Prior to coming to us for sale Woolmer Engineering gave the car a thorough going through to make sure that it was ready for it’s next owner. At this this time there was a major service carried out, along with a new clutch fitted.
All documentation we currently have for the car is availble upon request, and of course we would welcome any inspections/ viewings.
Later in the cars life it was fully race prepared for historic series and currently has HTP papers valid until the 31st of December 2027.
Current engine is a Paul Inch 1293cc which has been dyno’d with 142bhp at the fly wheel and with 111bhp at the road wheels. At the same time that this was carried out the car was weighed coming in at 621. 5kg.
In 2023 SMG engineering carried out the below works:
KAD Steel Shim Race Head Gasket
New Valves
New top Hats
Remove Doors, Repair Hinges & Refit Correctly
Repair Wiring & Tidy Up Under Bonnet
Replace Bent Bonnet Hinges
Replace All Fuel Line – Tank/ Pump/ Carbs
Move Fire Extinguisher & Re-Pipe
Replace Pulls & Re-Route.
Replace Suspension Cones
Brake Fluid Change
Replace Breather Hoses & Coolant Hoses for Heater Box
In the way of race history, we have the following entry’s/ results on file:
July 2017 – Silverstone Classic – P11
September 2017 – Spa Six Hours – P8
April 2019 – 77th Goodwood Members Meeting Betty Richmond Trophy – P15
Prior to coming to us for sale Woolmer Engineering gave the car a thorough going through to make sure that it was ready for it’s next owner. At this this time there was a major service carried out, along with a new clutch fitted.
All documentation we currently have for the car is availble upon request, and of course we would welcome any inspections/ viewings.
